List of products by brand Pop in - Close Parent

There are 4 products.

Sort by:
Relevance Name, A to Z Name, Z to A Price, low to high Price, high to low
Showing 1-4 of 4 item(s)
Quick view
Add to Wishlist
AI2

AI2 Pop In Close Parent SNAP

Price €28.28
Suitable from 5 to 15 kg (depends on the child's body size) The Pop-In nappy combines optimal absorbency with a trendy and colorful design in one size. The waist size of the diaper can be adjusted with the snap closure. The waist height is adjusted via press studs on the front, so a total of four sizes are possible. The large absorbent insert and booster are attached to the waterproof outer diaper with press studs. This keeps them in place. The diaper guarantees a good fit at any age thanks to the elastic edges and the double barrier. The inside is made of soft and absorbent viscose (bamboo). As a result, the diaper is not as bulky. The Pop-In insert set can be replaced with a new one if the pad is not completely wet. The inside of the outer diaper is lined with microfleece, including a mini absorbent core, which also moistens when the absorbent core is wet. That's why this diaper is more like an all-in-one diaper. So if a baby pees in the diaper several times over the course of three hours, the pad and outer liner will most likely need to be washed together. If you're looking for a system where you can use the cover over and over again, check out Pop-in's cover. You can equip them with all kinds of pads and assemble your diaper as you wish. Care instructions: Washable up to 60°C. The inserts are dryer safe, the outer nappy is not. It makes sense to separate the insert from the outer cover before washing. The weight of the wet insole can pull the elastics, especially during drying, and wear them out over time. Excessive heat can damage the PUL! Avoid drying the pul on the radiator or hanging it in direct sunlight during the hottest hours. Material: Outer: 100% Polyester (PUL) Absorbent core and top layer: 70% viscose (bamboo based), 30% cotton Absorbent core and reinforcing base layer: 100% polyester
Quick view
Add to Wishlist
AI2

AI2 Pop In Close Parent VELCRO

Price €28.28
Suitable from 5 to 15 kg (depends on the child's body size) The Pop-In nappy combines optimal absorbency with a trendy and colorful design in one size. The waist size of the diaper can be adjusted with the Velcro fastener. The waist height is adjusted via press studs on the front, so a total of four sizes are possible. The large absorbent insert and booster are attached to the waterproof outer diaper with press studs. This keeps them in place. The diaper guarantees a good fit at any age thanks to the elastic edges and the double barrier. The inside is made of soft and absorbent viscose (bamboo). As a result, the diaper is not as bulky. The Pop-In insert set can be replaced with a new one if the pad is not completely wet. The inside of the outer diaper is lined with microfleece, including a mini absorbent core, which also moistens when the absorbent core is wet. That's why this diaper is more like an all-in-one diaper. So if a baby pees in the diaper several times over the course of three hours, the pad and outer liner will most likely need to be washed together. If you're looking for a system where you can use the cover over and over again, check out Pop-in's cover. You can equip them with all kinds of pads and assemble your diaper as you wish. Care instructions: Washable up to 60°C. The inserts are dryer safe, the outer nappy is not. It makes sense to separate the insert from the outer cover before washing. The weight of the wet insole can pull the elastics, especially during drying, and wear them out over time. Excessive heat can damage the PUL! Avoid drying the pul on the radiator or hanging it in direct sunlight during the hottest hours. Material: Outer: 100% Polyester (PUL) Absorbent core and top layer: 70% viscose (bamboo based), 30% cotton Absorbent core and reinforcing base layer: 100% polyester
Quick view
Add to Wishlist
COVERS

Pop In Close Parent VELCRO One Size Cover

Price €19.91
* Suitable from 5 to 15 kg (depending on body size) Pop-in covers are very flexible. It can be combined with any absorbent base, such as prefolds or muslins, but also with small fitted ones that are not very bulky. If the insert is wet, but hasn't soaked the cover, it can continue to be used without being put in the washing machine. The snaps on the front of the cover allow for four different height adjustments. So they grow up with the baby for a long time. Double barriers provide protection against leaks. The combination with the Velcro is so clever that the fit is suitable for both slim and taller children. If you prefer a diaper with matching inserts, there's the Pop-In V2 washable diaper. Attention: these covers are not compatible with the inserts of the Pop-In V2! Material: 100% polyester (polyurethane coated) Care: Washable up to 60 degrees. Not suitable for tumble drying. Excessive heat can damage the PUL! Avoid drying on the radiator or hanging them in direct sunlight during the hottest hours. Do not use bleach or fabric softener.

New Account Register

Already have an account?
Log in instead Or Reset password