Cloth Diaper AI2 Flexi Blümchen VELCRO (without inserts)

Long insert for extra absorbent nappies made up of 3 layers, equipped with a practical button for application. It is used to increase the absorbency of the diaper, in particular it perfectly integrates the following products: SIO basic NEW VERSION, one-size diaper or Maxi/Night diaper. It is made on the outside of 60% bamboo viscose and 40% organic cotton. The inside is 80% cotton and 20% polyester. It can be washed in the washing machine (up to 60°).

Suitable from 5 to 15 kg (depends on the child's body size) The Pop-In nappy combines optimal absorbency with a trendy and colorful design in one size. The waist size of the diaper can be adjusted with the snap closure. The waist height is adjusted via press studs on the front, so a total of four sizes are possible. The large absorbent insert and booster are attached to the waterproof outer diaper with press studs. This keeps them in place. The diaper guarantees a good fit at any age thanks to the elastic edges and the double barrier. The inside is made of soft and absorbent viscose (bamboo). As a result, the diaper is not as bulky. The Pop-In insert set can be replaced with a new one if the pad is not completely wet. The inside of the outer diaper is lined with microfleece, including a mini absorbent core, which also moistens when the absorbent core is wet. That's why this diaper is more like an all-in-one diaper. So if a baby pees in the diaper several times over the course of three hours, the pad and outer liner will most likely need to be washed together. If you're looking for a system where you can use the cover over and over again, check out Pop-in's cover. You can equip them with all kinds of pads and assemble your diaper as you wish. Care instructions: Washable up to 60°C. The inserts are dryer safe, the outer nappy is not. It makes sense to separate the insert from the outer cover before washing. The weight of the wet insole can pull the elastics, especially during drying, and wear them out over time. Excessive heat can damage the PUL! Avoid drying the pul on the radiator or hanging it in direct sunlight during the hottest hours. Material: Outer: 100% Polyester (PUL) Absorbent core and top layer: 70% viscose (bamboo based), 30% cotton Absorbent core and reinforcing base layer: 100% polyester

These inserts are specifically designed to increase the absorbency of Easy Me cloth diapers: thanks to the small snap and their size, they fit perfectly, creating minimum bulk and maximum tightness. The side elastics, in fact, retain the losses without marking. They can also be combined with Magabi's S and M covers. They consist of 2 pieces attached to each other by a snap (an insert and a booster): you can combine them according to your needs, using them together or separately. Materials: insert/booster, shell: 80% bamboo, 20% organic cotton; inside: 70% polyester, 30% polyamide. They can be washed in the washing machine (maximum 60°) and dry easily (even in the dryer!).

The inserts for ai2 Anavy are available long and short with snap predisposition for attachment to the ai2 one-size-fits-all shell. they are also compatible with fitted Anavy. the insert is made of 80% bamboo viscose and 20% polyester reaches maximum absorbency after about 10 uses.

The insert is the part of the washable diaper that absorbs pee: it is a very important element and must be chosen with care. These ULTRA inserts for Easy Me adapt perfectly to the shape of the diapers thanks to their contoured shape. They are also equipped with buttons to fix them to Easy Me diapers and make them even more comfortable. EasyMe absorbent inserts are available in different sizes, which correspond to the size of disposable nappies: size 5 is suitable for babies from 9 to 16 kg. These inserts are made with an innovative fabric called ULTRA (it not only absorbs, but distributes the wet along its entire length) covered on both sides with a soft bamboo and organic cotton fabric. They are made up of two inserts joined together thanks to a practical snap, to allow you to adjust their absorbency even further. Magabi fabrics, all certified, are carefully chosen and make the diaper highly absorbent which remains soft even after dozens of washing cycles. Care method: – can be machine washed (max 60°C) – inserts can be tumble dried - do not iron – do not use fabric softeners Composition: outside: 80% bamboo 20% organic cotton inside: 70% polyester 30% polyamide

These new Petit Lulù inserts consist of a base (composed of 60% bamboo viscose and 40% organic cotton) and a longer insert that can be easily added thanks to a snap, to ensure maximum absorbency. This insert is made on the outside of 60% bamboo viscose and 40% organic cotton, while the inside is 80% cotton and 20% polyester. All you need to do with this comfortable model is a classic Petit Lulu cover (not included) to get an ALL – IN – TWO diaper. The size is suitable for children from 4 to 15 kg and, thanks to its high absorbency, it can also be used at night. The small and soft elasticated wings around the baby's legs protect the outside from any pee spills. It can be machine washed and dries easily as the inner insert can be detached and laid out separately.

this mini booster is made up of 4 layers of super soft 100% organic cotton and measures 8x16 cm. it can be used to reinforce a small area of any trim, but it snaps compatible with the Magabi ai2 insert (not included) making it a great reinforcement booster. can be washed at 60 degrees and tumble dried. do not use optical brighteners and softeners.

about the article: - snap for SIO system for fixing the SIO inserts - by attaching the booster we increase the absorbency of the cartridge - absorbent after the first wash! - very soft - extremely fast drying! MAYKA is an alternative thermoactive jersey, it regulates the temperature at the bottom of the child and wicks moisture away from the insert. Provides breathability and a pleasant cool feeling in summer. Care method: - wash max 60 ° C - can be tumble dried - do not iron - do not use fabric softeners Composition: outer layer 100% polyester archival: 100% polyester

Magabi merino wool covers act as a waterproof layer for nappies, are very easy to use and give your little one maximum comfort. They do not need to be washed as often as other diapers: in fact, when they get wet, it is sufficient to ventilate them and, once dry, reuse them. This is because the lanolin contained in wool fibers breaks down urine into salts and water, which evaporates easily. These covers are a very effective solution for night trim too, used in conjunction with fitted or foldable covers. Composition: two layers of 100% merino wool Why wool? Wool has antibacterial, thermoregulatory and transpiring properties, and the lanolin it contains ensures that the diaper stays put, making these covers ideal for any weather and season. They are also very delicate, soft and aesthetic. Magabi wool covers were made in Poland with Italian merino wool, which is characterized by extraordinary softness and delicacy. Before first use: – wash at max 30°C – rinse in water with vinegar – once dry proceed with lanolisation (even twice) Care: – hand wash at max 30°C – avoid sudden changes in temperature – do not use rinsing liquids – redo if necessary when you start to see losses Characteristics: - one size fits all from 4 kg to about 16kg depending on body size - lateral fastening on the hips with snaps to avoid excessive crushing on the abdomen - the cover can be independently pulled up like normal panties - the side ears are further reinforced so as not to get damaged during pulling

The Bamboo Air absorbent insert for Mommy Mouse's SIO is made of soft bamboo to the touch , for sensitive skin that tolerates the sensation of wetness. Inside, the insert is made up of 3 layers of absorbent microfibre. The insert for the SIO is composed of: 1 booster and 1 shaped insert that hooks to the shell. The bamboo inserts for the SIO Mommy Mouse are available in 2 sizes : S/M : measures 29cm x 11cm (in the central part) L/XL : measures 34cm x 11cm The booster attaches to the shaped insert via a practical pressure button (snap) located on the back of the insert, so as to stay more still inside the shell of the HIS and not bother your baby's skin.

Totsbots peenut wraps are soft and adjustable: in fact, they follow the growth of your child. They can be used to cover fitted, foldable and, thanks to the two comfortable internal flaps, even with the inserts and boosters you already have. This cover is part of an ai2 system with matching inserts (the peenut pads) that attaches to the waterproof cover with two snaps. The snap fit also makes it compatible with two-snap Petit Lulu inserts. The convenience of the ai2 or cover + folding/inserts system is that if the cover is not dirty with poo or pee soup, it can be reused. They dress from about 3 to 8 kg. These cases, to guarantee you a 100% green product, have been created from recycled plastic bottles. They are also Oekotex certified, to give you the certainty that no harmful chemicals get close to your children's skin. - no harmful chemicals near your children's skin.

Suitable from 5 to 15 kg (depends on the child's body size) The Pop-In nappy combines optimal absorbency with a trendy and colorful design in one size. The waist size of the diaper can be adjusted with the Velcro fastener. The waist height is adjusted via press studs on the front, so a total of four sizes are possible. The large absorbent insert and booster are attached to the waterproof outer diaper with press studs. This keeps them in place. The diaper guarantees a good fit at any age thanks to the elastic edges and the double barrier. The inside is made of soft and absorbent viscose (bamboo). As a result, the diaper is not as bulky. The Pop-In insert set can be replaced with a new one if the pad is not completely wet. The inside of the outer diaper is lined with microfleece, including a mini absorbent core, which also moistens when the absorbent core is wet. That's why this diaper is more like an all-in-one diaper. So if a baby pees in the diaper several times over the course of three hours, the pad and outer liner will most likely need to be washed together. If you're looking for a system where you can use the cover over and over again, check out Pop-in's cover. You can equip them with all kinds of pads and assemble your diaper as you wish. Care instructions: Washable up to 60°C. The inserts are dryer safe, the outer nappy is not. It makes sense to separate the insert from the outer cover before washing. The weight of the wet insole can pull the elastics, especially during drying, and wear them out over time. Excessive heat can damage the PUL! Avoid drying the pul on the radiator or hanging it in direct sunlight during the hottest hours. Material: Outer: 100% Polyester (PUL) Absorbent core and top layer: 70% viscose (bamboo based), 30% cotton Absorbent core and reinforcing base layer: 100% polyester

Long insert for extra absorbent nappies made up of 3 layers, equipped with a practical button for application. It is used to increase the absorbency of the diaper, in particular it perfectly integrates the following products: SIO basic NEW VERSION, one-size diaper or Maxi/Night diaper. It is made on the outside of 60% bamboo viscose and 40% organic cotton. The inside is 80% cotton and 20% polyester. It can be washed in the washing machine (up to 60°).

The thermo air absorbent insert for Mommy Mouse's SIO is in soft coolmax on contact , quick drying and gives your baby's skin a pleasant feeling of comfort and dryness. Inside, the insert is made up of 3 layers of absorbent microfibre. The inner side is always in latest generation thermo-air : technical fabric that evaporates moisture (from pee) outwards, leaving your baby's skin dry. The insert for the SIO is composed of: 1 booster and 1 shaped insert that hooks to the shell. The thermo air inserts for the SIO Mommy Mouse are available in 2 sizes : S/M : measures 29cm x 11cm (in the central part) L/XL : measures 34cm x 11cm The booster attaches to the shaped insert via a practical pressure button (snap) located on the back of the insert, so as to stay more still inside the shell of the HIS and not bother your baby's skin.