Magabi bamboo and cotton booster

The contoured four layer hemp and cotton booster can easily be used as an insert to increase absorbency with foldable, fitted and pocket inserts. very useful and very performing for the night. Size S Unwashed: 31x11 cm Washed: 25 x 10 cm Size L Unwashed: 36x12 cm Washed: 29x11 cm Material: 45% cotton (organic), 55% hemp. Wash 6-8 times before considering it ready for the night. Run water over the fabric to test its absorbency. If the water is absorbed immediately, the insert can be used. If not, the insert still needs to be used. The number of washes required depends on the washing machine, the detergent and the hardness of the water. Washable up to 60°. Suitable for tumble dryers. Do not use bleach or fabric softener. Made in the USA

They are inserts for the all in two (ai2) washable diaper model that Blumchen calls flexi. These are inserts equipped at one or both ends with a velcro strip compatible with the ai2 flexi aio model. Velcro is an alternative method to buttons for fixing the inserts. The convenience of this system, as with all ai2s, is that you can use the cover several times by replacing the dirty inserts with clean ones. You can choose between different lengths and absorbent and contact materials. This allows the flexi aio to constantly adapt to the needs of the moment.

3 layers of softness and absorbency in 3 comfortable sizes useful for reinforcing all your favorite structures. 60% bamboo viscose and 40% cotton for the shaped ones and the others 67% bamboo viscose, 27% organic cotton and 6% elastane. you can wash at 60 degrees and tumble dry on a low setting. indicative measurements M 12x30 (perfect for pocket milovia) L and shaped 12x35

The insert is the part of the washable diaper that absorbs pee: it is a very important element and must be chosen with care. These ULTRA inserts for Easy Me adapt perfectly to the shape of the diapers thanks to their contoured shape. They are also equipped with buttons to fix them to Easy Me diapers and make them even more comfortable. EasyMe absorbent inserts are available in different sizes, which correspond to the size of disposable nappies: size 4 is suitable for babies from 6 to 10 kg. These inserts are made with an innovative fabric called ULTRA (it not only absorbs, but distributes the wet along its entire length) covered on both sides with a soft bamboo and organic cotton fabric. They are made up of two inserts joined together thanks to a practical snap, to allow you to adjust their absorbency even further. Magabi fabrics, all certified, are carefully chosen and make the diaper highly absorbent which remains soft even after dozens of washing cycles. Care method: – can be machine washed (max 60°C) – inserts can be tumble dried - do not iron – do not use fabric softeners Composition: outside: 80% bamboo 20% organic cotton inside: 70% polyester 30% polyamide

Insert used to increase the absorbency of your cloth nappies: you can use it individually or combine it with others. The top layer is in fleece and in contact with your baby's skin it keeps him dry. It is made up of 2 layers of highly absorbent hemp and a layer of polyester fleece (55% hemp – 45% OEKO-TEX100 organic cotton; 100% polyester). Dimensions: 31cm x 12cm

The Bumgenius microfiber day insert is lined with soft suede that allows the skin to stay dry after peeing. it has the possibility of being folded in three sizes thanks to the two grooves present on the insert and adapting to the growth. it is advisable to always combine an insert made of natural materials when you realize that the insert alone is no longer sufficient to guarantee two hours without leaks. nb microfibres are not all the same. some make contact, some don't. if you have bubbi, before you burn your baby's skin, write to me.

incredibly thin and extremely absorbent. the Magabi SUPER BOOSTER measures 10x30 cm in size 2 and should be used like the hemp one (therefore as the last absorbent layer) with the only difference being that its thickness is only 2 mm!! a versatile and innovative fabric that dries quickly, absorbs, distributes wetness over the entire surface and does not take up too much space. wash before use (it takes about ten uses to reach maximum absorbency)

The single inserts are compatible with the POCKET MOMMY MOUSE and are available in 3 sizes: S: to be used from 4 kg to 6 kg, measuring 28 cm x 11 cm M: to be used from 6 kg to 10 kg, measuring 31 cm x 12 cm L: used from 10 kg upwards, measures 36.5 cm x 13 cm The inserts can be combined with each other to give the diaper greater absorbency. they can also be used inside mommy mopuse sios and covers (but they do not have buttons) Mommy Mouse is perfect in every smallest detail!

An insert with elastic flaps sewn inside, which wrap around the child's groin and are designed to protect the cover from dirt. The materials used for the production of Magabi diapers are produced in Poland and the EU and have safety certificates. MADE IN POLAND! Care method: - wash max 60°C - can be tumble dried - do not iron - do not use fabric softeners Composition: 100% cotton ali 100% polyester

They are made up of 4 layers: 2 layers of microfibre and two layers made of 55% hemp and 45% cotton. Hemp and cotton can contain larger quantities of liquid than microfiber but absorb more slowly and could cause lateral leakage if used alone and if the child pees a lot. In combination with the microfibre, which quickly absorbs moisture keeping the baby's skin dry, they are perfect: no leaks and extra absorbency!

Magabi boosters are made with certified European raw materials and handcrafted in Poland. The organic cotton boosters consist of 3 absorbent layers. They are indicated for Magabi pocket and newborn cover, but can be used up to diaper feeding as a booster in any configuration and with all the other newborn diapers measures size 1 8x23 cm measures size 2 9x27cm long 8,5x46cm after washing the size will decrease by Approximately 10%, but it will remain soft. Wash at a maximum of 60 degrees, can be tumble dried, do not use optical brighteners and softeners.

The inserts for ai2 Anavy are available long and short with snap predisposition for attachment to the ai2 one-size-fits-all shell. they are also compatible with fitted Anavy. the insert is made of 80% bamboo viscose and 20% polyester reaches maximum absorbency after about 10 uses.