AI2

There are 8 products.

Sort by:
Best sellers Relevance Name, A to Z Name, Z to A Price, low to high Price, high to low
Showing 1-8 of 8 item(s)

Active filters

  • Brand: Mommy Mouse
  • Brand: Pop in - Close Parent
  • Brand: Smart Bottoms
  • Availability: Available
Quick view
Add to Wishlist
AI2

AI2 Pop In Close Parent SNAP

Price €28.28
Suitable from 5 to 15 kg (depends on the child's body size) The Pop-In nappy combines optimal absorbency with a trendy and colorful design in one size. The waist size of the diaper can be adjusted with the snap closure. The waist height is adjusted via press studs on the front, so a total of four sizes are possible. The large absorbent insert and booster are attached to the waterproof outer diaper with press studs. This keeps them in place. The diaper guarantees a good fit at any age thanks to the elastic edges and the double barrier. The inside is made of soft and absorbent viscose (bamboo). As a result, the diaper is not as bulky. The Pop-In insert set can be replaced with a new one if the pad is not completely wet. The inside of the outer diaper is lined with microfleece, including a mini absorbent core, which also moistens when the absorbent core is wet. That's why this diaper is more like an all-in-one diaper. So if a baby pees in the diaper several times over the course of three hours, the pad and outer liner will most likely need to be washed together. If you're looking for a system where you can use the cover over and over again, check out Pop-in's cover. You can equip them with all kinds of pads and assemble your diaper as you wish. Care instructions: Washable up to 60°C. The inserts are dryer safe, the outer nappy is not. It makes sense to separate the insert from the outer cover before washing. The weight of the wet insole can pull the elastics, especially during drying, and wear them out over time. Excessive heat can damage the PUL! Avoid drying the pul on the radiator or hanging it in direct sunlight during the hottest hours. Material: Outer: 100% Polyester (PUL) Absorbent core and top layer: 70% viscose (bamboo based), 30% cotton Absorbent core and reinforcing base layer: 100% polyester
Quick view
Add to Wishlist
AI2

AI2 Pop In Close Parent VELCRO

Price €28.28
Suitable from 5 to 15 kg (depends on the child's body size) The Pop-In nappy combines optimal absorbency with a trendy and colorful design in one size. The waist size of the diaper can be adjusted with the Velcro fastener. The waist height is adjusted via press studs on the front, so a total of four sizes are possible. The large absorbent insert and booster are attached to the waterproof outer diaper with press studs. This keeps them in place. The diaper guarantees a good fit at any age thanks to the elastic edges and the double barrier. The inside is made of soft and absorbent viscose (bamboo). As a result, the diaper is not as bulky. The Pop-In insert set can be replaced with a new one if the pad is not completely wet. The inside of the outer diaper is lined with microfleece, including a mini absorbent core, which also moistens when the absorbent core is wet. That's why this diaper is more like an all-in-one diaper. So if a baby pees in the diaper several times over the course of three hours, the pad and outer liner will most likely need to be washed together. If you're looking for a system where you can use the cover over and over again, check out Pop-in's cover. You can equip them with all kinds of pads and assemble your diaper as you wish. Care instructions: Washable up to 60°C. The inserts are dryer safe, the outer nappy is not. It makes sense to separate the insert from the outer cover before washing. The weight of the wet insole can pull the elastics, especially during drying, and wear them out over time. Excessive heat can damage the PUL! Avoid drying the pul on the radiator or hanging it in direct sunlight during the hottest hours. Material: Outer: 100% Polyester (PUL) Absorbent core and top layer: 70% viscose (bamboo based), 30% cotton Absorbent core and reinforcing base layer: 100% polyester
Quick view
Add to Wishlist
BOOSTERS AND INSERTS

Dream 2.0 hemp night insert + stay dry Smart Bottoms

Price €15.61
Snap fit insert compatible with AIO Dream 2.0 Smart Bottoms washable diaper. Especially suitable for the night. Length: 9x60 cm Material: 55% hemp, 45% cotton (organic), Seam: 100% polyester Washing instructions: Wash 6-8 times before first use. Run water over the insert to test its absorbency. If the water is absorbed immediately, the insert can be used. If not, the insert has not yet been washed sufficiently and needs to be washed again. The number of washes required depends on the washing machine, the detergent and the hardness of the water. Washable up to 60°. Suitable for tumble dryers. Do not use bleach or fabric softener. Made in the USA
Quick view
Add to Wishlist
AI2

Inserts Sio/AI2 Natura Line Mommy Mouse

Price €7.85
The Natura Line absorbent insert for Mommy Mouse's SIO is made of soft bamboo on contact , for sensitive skin that tolerates the sensation of wetness. All the insert is super absorbent as there is no central microfiber. The insert for the SIO is composed of: 1 booster and 1 shaped insert that hooks to the shell. The Natura Line inserts for the SIO Mommy Mouse are available in 2 sizes : S/M : measures 29cm x 11cm (in the central part) L/XL : measures 34cm x 11cm The booster attaches to the shaped insert via a practical pressure button (snap) located on the back of the insert, so as to stay more still inside the shell of the HIS and not bother your baby's skin.
Quick view
Add to Wishlist
AI2

Inserts Sio/AI2 Night Mommy Mouse

Price €7.85
The Night Soft absorbent insert in bamboo   by Mommy Mouse is made of soft bamboo on contact , very absorbent. Inside, the insert is made up of two layers of highly absorbent bamboo sponge . The small button (snap) located under the insert allows you to choose the booster to insert based on the desired absorbency and your baby's skin. The inner side is in thermo-air to give maximum transpiration to damp skin. Suitable for children who are not particularly "productive" at night. The Night Plus absorbent insert in bamboo   by Mommy Mouse is made of soft bamboo on contact , very absorbent. Inside, the insert is made up of two layers of highly absorbent bamboo sponge . The small button (snap) located under the insert allows you to choose the booster to insert based on the desired absorbency and your baby's skin. The inner side is made of bamboo to give maximum absorbency with a natural fabric suitable for more "productive" children The insert is one size fits all. Mommy Mouse is perfect in every little detail!
Quick view
Add to Wishlist
AI2

Sio/AI2 inserts with Mommy Mouse contact Bamboo

Price €8.91
The Bamboo Air absorbent insert for Mommy Mouse's SIO is made of soft bamboo to the touch , for sensitive skin that tolerates the sensation of wetness. Inside, the insert is made up of 3 layers of absorbent microfibre. The insert for the SIO is composed of: 1 booster and 1 shaped insert that hooks to the shell. The bamboo inserts for the SIO Mommy Mouse are available in 2 sizes : S/M : measures 29cm x 11cm (in the central part) L/XL : measures 34cm x 11cm The booster attaches to the shaped insert via a practical pressure button (snap) located on the back of the insert, so as to stay more still inside the shell of the HIS and not bother your baby's skin.
Quick view
Add to Wishlist
AI2

Sio/AI2 inserts with Mommy Mouse contact microfleece

Price €8.91
The polar-air absorbent insert for Mommy Mouse's SIO is made of soft microfleece on contact , quick drying and gives your baby's skin a pleasant sensation of comfort and dryness. Inside, the insert is made up of 3 layers of absorbent microfibre. The inner side is always in latest generation thermo-air : technical fabric that evaporates moisture (from pee) outwards, leaving your baby's skin dry. The insert for the SIO is composed of: 1 booster and 1 shaped insert that hooks to the shell. The polar-air inserts for the SIO Mommy Mouse are available in 2 sizes : S/M : measures 29cm x 11cm (in the central part) L/XL : measures 34cm x 11cm The booster attaches to the shaped insert via a practical pressure button (snap) located on the back of the insert, so as to stay more still inside the shell of the HIS and not bother your baby's skin.
Quick view
Add to Wishlist
AI2

Sio/AI2 inserts with thermo air (coolmax) in contact with Mommy Mouse

Price €7.85
The thermo air absorbent insert for Mommy Mouse's SIO is in soft coolmax on contact , quick drying and gives your baby's skin a pleasant feeling of comfort and dryness. Inside, the insert is made up of 3 layers of absorbent microfibre. The inner side is always in latest generation thermo-air : technical fabric that evaporates moisture (from pee) outwards, leaving your baby's skin dry. The insert for the SIO is composed of: 1 booster and 1 shaped insert that hooks to the shell. The thermo air inserts for the SIO Mommy Mouse are available in 2 sizes : S/M : measures 29cm x 11cm (in the central part) L/XL : measures 34cm x 11cm The booster attaches to the shaped insert via a practical pressure button (snap) located on the back of the insert, so as to stay more still inside the shell of the HIS and not bother your baby's skin.

New Account Register

Already have an account?
Log in instead Or Reset password