Get Reward Points

Hey! buy any product from this category and collect 25 Reward Point(s) which worth €0.50

AI2

There are 8 products.

Sort by:
Best sellers Relevance Name, A to Z Name, Z to A Price, low to high Price, high to low
Showing 1-8 of 8 item(s)

Active filters

  • Brand: Blumchen
  • Brand: Nappiness
  • Brand: Pop in - Close Parent
  • Brand: Tots Bots
  • Brand: Unuo
  • Availability: Available
  • Availability: In stock
Quick view
Add to Wishlist
AI2

AI2 Pop In Close Parent SNAP

Price €28.28
Suitable from 5 to 15 kg (depends on the child's body size) The Pop-In nappy combines optimal absorbency with a trendy and colorful design in one size. The waist size of the diaper can be adjusted with the snap closure. The waist height is adjusted via press studs on the front, so a total of four sizes are possible. The large absorbent insert and booster are attached to the waterproof outer diaper with press studs. This keeps them in place. The diaper guarantees a good fit at any age thanks to the elastic edges and the double barrier. The inside is made of soft and absorbent viscose (bamboo). As a result, the diaper is not as bulky. The Pop-In insert set can be replaced with a new one if the pad is not completely wet. The inside of the outer diaper is lined with microfleece, including a mini absorbent core, which also moistens when the absorbent core is wet. That's why this diaper is more like an all-in-one diaper. So if a baby pees in the diaper several times over the course of three hours, the pad and outer liner will most likely need to be washed together. If you're looking for a system where you can use the cover over and over again, check out Pop-in's cover. You can equip them with all kinds of pads and assemble your diaper as you wish. Care instructions: Washable up to 60°C. The inserts are dryer safe, the outer nappy is not. It makes sense to separate the insert from the outer cover before washing. The weight of the wet insole can pull the elastics, especially during drying, and wear them out over time. Excessive heat can damage the PUL! Avoid drying the pul on the radiator or hanging it in direct sunlight during the hottest hours. Material: Outer: 100% Polyester (PUL) Absorbent core and top layer: 70% viscose (bamboo based), 30% cotton Absorbent core and reinforcing base layer: 100% polyester
  • -30%
Quick view
Add to Wishlist
AI2

Shaped insert AI2 / SIO Unuo

Regular price €11.09 -30% Price €7.76
The AI2 / SIO insert is a shaped base equipped with buttons to attach to the Unuo ai2 sio cover. it is equipped with a pocket for inserting not too large absorbent boosters. It can be used inside any cover by placing it directly inside. Furthermore, at the crotch, two flaps in soft stay dry fabric that cover a soft elastic band prevent pee and poop from leaking. In contact, the fabric is made of 80% bamboo and 20% polyester. the absorbent core is made of cotton (95%) and elastane.
Quick view
Add to Wishlist
AI2

Cover / AI2 Peenut Wrap TotsBots (without inserts) - size XL

Price €19.79
Totsbots peenut wraps are soft and adjustable: in fact, they follow the growth of your child. They can be used to cover fitted, foldable and, thanks to the two comfortable internal flaps, even with the inserts and boosters you already have. This cover is part of an ai2 system with matching inserts (the peenut pads) that attaches to the waterproof cover with two snaps. The snap fit also makes it compatible with two-snap Petit Lulu inserts. The convenience of the ai2 or cover + folding/inserts system is that if the cover is not dirty with poo or pee soup, it can be reused. They dress from about 3 to 8 kg. These cases, to guarantee you a 100% green product, have been created from recycled plastic bottles. They are also Oekotex certified, to give you the certainty that no harmful chemicals get close to your children's skin. - no harmful chemicals near your children's skin.
Quick view
Add to Wishlist
AI2

AI2 Pop In Close Parent VELCRO

Price €28.28
Suitable from 5 to 15 kg (depends on the child's body size) The Pop-In nappy combines optimal absorbency with a trendy and colorful design in one size. The waist size of the diaper can be adjusted with the Velcro fastener. The waist height is adjusted via press studs on the front, so a total of four sizes are possible. The large absorbent insert and booster are attached to the waterproof outer diaper with press studs. This keeps them in place. The diaper guarantees a good fit at any age thanks to the elastic edges and the double barrier. The inside is made of soft and absorbent viscose (bamboo). As a result, the diaper is not as bulky. The Pop-In insert set can be replaced with a new one if the pad is not completely wet. The inside of the outer diaper is lined with microfleece, including a mini absorbent core, which also moistens when the absorbent core is wet. That's why this diaper is more like an all-in-one diaper. So if a baby pees in the diaper several times over the course of three hours, the pad and outer liner will most likely need to be washed together. If you're looking for a system where you can use the cover over and over again, check out Pop-in's cover. You can equip them with all kinds of pads and assemble your diaper as you wish. Care instructions: Washable up to 60°C. The inserts are dryer safe, the outer nappy is not. It makes sense to separate the insert from the outer cover before washing. The weight of the wet insole can pull the elastics, especially during drying, and wear them out over time. Excessive heat can damage the PUL! Avoid drying the pul on the radiator or hanging it in direct sunlight during the hottest hours. Material: Outer: 100% Polyester (PUL) Absorbent core and top layer: 70% viscose (bamboo based), 30% cotton Absorbent core and reinforcing base layer: 100% polyester
Quick view
Add to Wishlist
AI2

Inserts for AI2 FLEXI AIO Blümchen

Price €5.14
They are inserts for the all in two (ai2) washable diaper model that Blumchen calls flexi. These are inserts equipped at one or both ends with a velcro strip compatible with the ai2 flexi aio model. Velcro is an alternative method to buttons for fixing the inserts. The convenience of this system, as with all ai2s, is that you can use the cover several times by replacing the dirty inserts with clean ones. You can choose between different lengths and absorbent and contact materials. This allows the flexi aio to constantly adapt to the needs of the moment.

New Account Register

Already have an account?
Log in instead Or Reset password